Proxim ORiNOCO AP-700 Manual de usuario descargar pdf (Pagina 21)

Getting Started AP-700 User Guide

Hardware Installation

Unpack the Access Point and accessories from the shipping box. Verify the contents as follows:

• AP-700 unit

• Mounting bracket with screws

• Power adapter

• Security cover

• Quick Installation Flyer

• Software CD

Perform the following procedures to install the AP hardware:

• Cabling the AP-700

• Installing the Security Cover

• Mounting the AP-700

• Installing Range Extender Antennas

Cabling the AP-700

Connect cables to the AP-700 as follows:

1. Plug the power cord into the power jack (the left port) and connect the unit to an AC power outlet (100~240V, 50~60Hz).

2. If using active Ethernet, connect power to the unit from a DC injector device, such as the ORiNOCO 1-Port Active Ethernet DC Injector

hub.

3. Attach one end of an Ethernet cable to the AP's WAN port (the center port, labeled “WAN”) and the other end to a network hub or switch.

4. Optionally, connect an RS-232 cable to the RS-232 console port (the right port, labeled “RS-232”).

NOTE

You cannot install the security cover to the AP-700 if an RS-232 cable is connected.

Figure 2-3 Cabling the AP-700

5. Verify LED Status

6. When the AP-700 boots, it performs a series of self-tests.

7. Wait for the power LED to turn green before proceeding.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 241 242

Sin comentarios

Proxim ORiNOCO AP-700 Manual de usuario Pagina 21