Proxim ORiNOCO AP-700 Manual de usuario descargar pdf (Pagina 144)

Using the Command Line Interface (CLI) AP-700 User Guide

Set Basic Configuration Parameters using CLI Commands

144

• Set System Name, Location and Contact Information

• Set Static IP Address for the AP

• Download an AP Configuration File from your TFTP Server

• Set up Auto Configuration

• Set Network Names for the Wireless Interface

• Enable 802.11d Support and Set the Country Code

• Enable and Configure TX Power Control for the Wireless Interface(s)

• Configure SSID (Network Name) and VLAN Pairs, and Profiles

• Download an AP Configuration File from your TFTP Server

• Backup your AP Configuration File

Set System Name, Location and Contact Information

[Device-Name]>set sysname <system name> sysloc <Unit Location>

[Device-Name]>set sysctname <Contact Name (person responsible for system)>

[Device-Name]>set sysctphone <Contact Phone Number> sysctemail <Contact E-mail address>

[Device-Name]>show system

Figure A-12 Result of “show system” CLI Command

Set Static IP Address for the AP

NOTE

The IP Subnet Mask of the AP must match your network’s Subnet Mask.

[Device-Name]>set ipaddrtype static

[Device-Name]>set ipaddr <fixed IP address of unit>

[Device-Name]>set ipsubmask <IP Mask>

[Device-Name]>set ipgw <gateway IP address>

[Device-Name]>show network

Change Passwords

[Device-Name]>passwd <Old Password> <New Password> <Confirm Password> (CLI password)

[Device-Name]>set httppasswd <New Password> (HTTP interface password)

[Device-Name]>set snmprpasswd <New Password> (SNMP read password)

[Device-Name]>set snmprwpasswd <New Password> (SNMP read/write)

[Device-Name]>set snmpv3authpasswd <New Password> (SNMPv3 authentication password)

[Device-Name]>set snmpv3privpasswd <New Password> (SNMPv3 privacy password)

[Device-Name]>reboot 0

CAUTION

Proxim strongly urges you to change the default passwords to restrict access to your network devices to authorized personnel. If you

lose or forget your password settings, you can always perform the Reset to Factory Default Procedure.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 241 242

Sin comentarios

Proxim ORiNOCO AP-700 Manual de usuario Pagina 144