Proxim ORiNOCO Guía de usuario descargar pdf (Pagina 82)

Using Web Interface to Manage the Access Point AP-800 User Guide

Managing the Device

Figure 6-39 Update Device Using HTTP- Success Message

• If the operation is not completed successfully the following screen appears, and the reason for the failure is

displayed.

Figure 6-40 Update Device Using HTTP- Failure Message

Update Device Using TFTP

Use the TFTP Download page to download config, image file to the device. A TFTP server must be running and

configured to pint to the directory containing the file.

If you do not have a TFTP server installed on your system, install the TFTP server from the installation CD. You can either

install the TFTP server from the CD Wizard or run OEM-TFTP-Server.exe found in the CD’s Xtras/SolarWinds

sub-directory.

Using the TFTP Download page to enter the following information as described below:

Figure 6-41 Update Device Using TFTP Server

• Server IP Address: Enter the TFTP server IP Address.

– Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server.

NOTE: This is the IP address that will be used to point the Access Point to the AP Image file.

• File Name: Enter the name of the file to be downloaded (including the file extension).

– Copy the file to the TFTP server’s root folder.

• File Type: Select the proper file type. Choices include:

– Config: Configuration information, such as System name, contact name, and so on.

– Image: AP image (executable program)

• Operation: Select either Download or Download & Reboot. You should reboot the AP after downloading files.

NOTE: If you select None as Operation, then no operation will be performed.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 144 145

Sin comentarios

Proxim ORiNOCO Guía de usuario Pagina 82