Proxim AP-2000 Guía de usuario Pagina 85
- Pagina / 244
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
85
Performing Advanced Configuration
The AP can segment users into a maximum of 16 different workgroups (32 if using two cards in a Dual-radio AP)
based on an SSID/VLAN pair (also referred as a VLAN Workgroup or a Sub-network).
NOTE
The ability to configure up to 16 VLAN/SSID pairs and to configure a security profile per SSID is available only
for 802.11b/g APs and 802.11a Upgrade Kit APs.
802.11b APs do not support multiple VLAN/SSID pairs. APs with the 802.11a card support multiple
VLAN/SSID pairs, but do not support the security profile per SSID capability.
The three primary scenarios for using VLAN workgroups are as follows:
1. VLAN disabled: Your network does not use VLANs, and you cannot configure the AP to use multiple SSIDs.
2. VLAN enabled, each VLAN workgroup uses a different VLAN ID Tag
3. VLAN enabled, a mixture of Tagged and Untagged workgroups
Enabling/Disabling VLAN Protocol
Control Access to the AP
Management access to the AP can easily be secured by making management stations or hosts and the AP itself
members of a common VLAN. Simply configure a non-zero management VLAN ID and enable VLAN to restrict
management of the AP to members of the same VLAN.
CAUTION
!
If a non-zero management VLAN ID is configured then management access to the AP is restricted to wired or
wireless hosts that are members of the same VLAN. Ensure your management platform or host is a member
of the same VLAN before attempting to manage the AP.
1. Click Configure > SSID/VLAN/Security.
2. Set the VLAN Management ID to a value between -1 and 4094 (a value of 0 disables VLAN management).
3. Place a check mark in the Enable VLAN Protocol box.
Provide Access to a Wireless Host in the Same Workgroup
The VLAN feature can allow wireless clients to manage the AP. If the VLAN Management ID matches a VLAN User ID,
then those wireless clients who are members of that VLAN will have AP management access.
CAUTION
!
Once a VLAN Management ID is configured and is equivalent to one of the VLAN User IDs on the AP, all
members of that User VLAN will have management access to the AP. Be careful to restrict VLAN membership
to those with legitimate access to the AP.
1. Click Configure > SSID/VLAN/Security.
2. Set the VLAN Management ID to use the same VLAN ID as one of the configured SSID/VLAN pairs. See Typical
User VLAN Configurations for details.
3. Place a check mark in the Enable VLAN Protocol box.
Disable VLAN Management
1. Click Configure > SSID/VLAN/Security.
2. Remove the check mark from the Enable VLAN Protocol box to disable all VLAN functionality.
- ORiNOCO AP-2000 Access Point 1
- Copyright 2
- Trademarks 2
- OpenSSL License Note 2
- Contents 10
- Introduction 12
- Guidelines for Roaming 13
- IEEE 802.11 Specifications 14
- SNMP Management 15
- Getting Started 16
- Product Package 17
- System Requirements 17
- Hardware Installation 18
- AP-2000 with Power Supply 19
- Initialization 24
- Setup Wizard 26
- Download the Latest Software 29
- Setup your TFTP Server 30
- Additional Hardware Features 31
- Active Ethernet 32
- LED Indicators 32
- Related Topics 33
- Viewing Status Information 34
- System Status 35
- Dynamic DNS Support 38
- IP Configuration 39
- DHCP Server 40
- Link Integrity 41
- Operational Mode 43
- Wireless-A and Wireless-B 43
- RTS/CTS Medium Reservation 44
- Wireless Service Status 44
- Wireless (802.11b) 45
- Distance Between APs 46
- Coverage 47
- Multicast Rate 47
- Wireless (802.11b/g) 48
- Bridging WDS 50
- WDS Setup Procedure 50
- Ethernet 52
- Management 53
- Services 54
- Secure Shell (SSH) Settings 56
- Serial Configuration Settings 58
- Filtering 64
- Static MAC Filter Examples 66
- Advanced 67
- TCP/UDP Port 67
- Editing TCP/UDP Port Filters 68
- • Security Trap Group 70
- • Operational Trap Group 70
- • Flash Memory Trap Group 70
- Alarm Host Table 72
- Syslog Messages 73
- Management Station 74
- Trusted AP 74
- Rogue AP 74
- Configuring RAD 75
- Spanning Tree 76
- Storm Threshold 76
- Intra BSS 76
- QoS (Quality of Service) 77
- RADIUS Profiles 78
- Configuring RADIUS Profiles 79
- RADIUS Accounting 82
- SSID/VLAN/Security 83
- MAC Access 86
- Security Profiles 87
- Wi-Fi Protected Access (WPA) 88
- VLANs and Security Profiles 89
- Configuring Security Profiles 90
- Monitoring the AP-2000 100
- IP/ARP Table 103
- Learn Table 104
- Interfaces 106
- Station Statistics 107
- Performing Commands 109
- HTTP File Transfer Guidelines 111
- TFTP File Transfer Guidelines 111
- Update AP via TFTP 112
- Update AP via HTTP 113
- Retrieve File via TFTP 115
- Retrieve File via HTTP 116
- Help Link 120
- Troubleshooting the AP-2000 121
- Symptoms and Solutions 122
- Client Connection Problems 124
- VLAN Operation Issues 124
- Recovery Procedures 125
- Forced Reload Procedure 126
- Related Applications 131
- General Notes 132
- Navigation and Special Keys 133
- CLI Error Messages 133
- Bootloader CLI 134
- CLI Command Types 135
- Parameter Control Commands 139
- Working with Tables 142
- Using Strings 143
- Log into the AP using Telnet 143
- Change Passwords 144
- Other Network Settings 147
- Configure the DNS Client 148
- (Mbits/sec)> 150
- Configure Syslog 151
- Configure Intra BSS 151
- Configure MAC Access Control 152
- Set RADIUS Parameters 153
- CLI Monitoring Parameters 156
- Parameter Tables 156
- System Parameters 158
- Network Parameters 159
- DHCP Server Parameters 160
- Link Integrity Parameters 161
- Interface Parameters 162
- 802.11b Only Parameters 163
- 802.11b/g Only Parameters 164
- Management Parameters 166
- Telnet Parameters 167
- Serial Port Parameters 167
- SSH Parameters 168
- Auto Configuration Parameters 169
- TFTP Server Parameters 169
- IP Access Table Parameters 169
- Filtering Parameters 170
- Proxy ARP Parameters 171
- IP ARP Filtering Parameters 171
- Broadcast Filtering Table 171
- TCP/UDP Port Filtering 171
- Alarms Parameters 172
- Bridge Parameters 173
- Storm Threshold Parameters 174
- Intra BSS Subscriber Blocking 174
- Packet Forwarding Parameters 174
- Security Parameters 175
- RADIUS Parameters 175
- VLAN/SSID Parameters 176
- Security Profile Table 177
- Other Parameters 178
- CLI Batch File 179
- Reboot Behavior 180
- ASCII Character Chart 181
- Specifications 182
- Advanced Bridging Functions 183
- Security Functions 183
- Network Functions 184
- Advanced Wireless Functions 184
- Physical Specifications 184
- Radio Specifications 185
- 802.11a Channel Frequencies 186
- 802.11b Channel Frequencies 187
- 802.11g Channel Frequencies 187
- Wireless Communication Range 188
- Technical Support 191
- Statement of Warranty 192
- Other Information 193
- Regulatory Information 194
- Information to the User 195
- Wireless LAN and your Health 196
- Informazioni per l’utente 199
- Wireless LAN e la salute 200
- Informazioni legali 200
- Rechtliche Hinweise 202
- Información para el usuario 203
- LAN inalámbrica y su salud 204
- Información sobre normativas 204
- United States FCC Information 207
- Canada IC Information 208
- Europe Information 209
- Japan Information 211
- South Korea Information 212
- Class (A) 212
- Class (B) 제품용 212
Relacionado con productos y manuales para Redes Proxim AP-2000
Redes Proxim RangeLAN2 7500 Manual de usuario
(141 paginas)
(141 paginas)
Redes Proxim 7910 Guía de usuario
(127 paginas)
(127 paginas)
Redes Proxim RangeLAN2 7921 Especificaciones
(76 paginas)
(76 paginas)
Redes Proxim RANGELAN2 7510 Guía de usuario
(84 paginas)
(84 paginas)
(9 paginas)EVGA 122-YW-E173-TR Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Motherboards EVGA 122-YW-E173-TR.
Wir stellen 1 PDF-Handbücher EVGA 122-YW-E173-TR zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Datenblatt
Comentarios a estos manuales