Proxim AP-2000 Guía de usuario descargar pdf (Pagina 149)

149

Using the Command Line Interface (CLI)

Operational Mode

[Device-Name]>set wif <index> mode <see table>

Autochannel Select (ACS)

ACS is enabled by default. Reboot after disabling or enabling ACS.

[Device-Name]>set wif <index> autochannel <enable/disable>

[Device-Name]>reboot 0

Enable/Disable Closed System

[Device-Name]>set wif <index> closedsys <enable/disable>

Shutdown/Resume Wireless Service

[Device-Name]>set wif <index> wssstatus <1 (resume)/2 (shutdown)>

Enable/Disable Interference Robustness (802.11b Only)

[Device-Name]>set wif <index> interrobust <enable/disable>

Enable/Disable Load Balancing (802.11b Only)

[Device-Name]>set wif <index> ldbalance <enable/disable>

Enable/Disable Medium Density Distribution (802.11b Only)

[Device-Name]>set wif <index> meddendistrib <enable/disable>

Set the Distance Between APs (802.11b Only)

[Device-Name]>set wif <index> distaps <large, medium, small, minicell, microcell>

[Device-Name]>reboot 0

NOTE

The distance between APs should not be approximated. It is calculated by means of a manual Site Survey, in

which an AP is set up and clients are tested throughout the area to determine signal strength and coverage,

and local limits such as physical interference are investigated. From these measurements the appropriate cell

size and density is determined, and the optimum distance between APs is calculated to suit your particular

business requirements.

mode Operational Mode

1 dot11b-only

2 dot11g-only

3 dot11/jointfilesconvert/370124/bg

4 dot11a-only

5 dot11g-wifi

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 243 244

Sin comentarios

Proxim AP-2000 Guía de usuario Pagina 149