Proxim ORiNOCO AP-2500 Guía de usuario descargar pdf (Pagina 153)

146

Using the Command Line Interface (CLI)

Enable 802.11d Support and Set the Country Code

Perform the following commands to enable IEEE 802.11d support for additional regulatory domains and set the

country code:

[Device-Name]>set sys 11d <enable> country <country>

Enable and Configure TX Power Control for the Wireless Interface(s)

The TX Power Control feature lets the user configure the transmit power level of the card in the AP at one of four

levels:

• 100% of the maximum transmit power level of the card

• 50%

• 25%

• 12.5%

Perform the following commands to enable TX Power Control and set the transmit power level:

[Device-Name]>set txpowercontrol enable

[Device-Name]>set wif <interface number> currenttxpowerlevel <value>

Allowed values are: 1 (100%), 2 (50%), 3 (25%), 4 (12.5%)

Configure SSID (Network Name) and VLAN Pairs, and Profiles

Perform the following command to configure an SSID/VLAN pair, and to assign a Security Profile and RADIUS Profiles

to it.

[Device-Name]>set wifssidtbl <Index.subindex> ssid <Network Name> vlanid <-1 to 1094>

ssidauth <enable/disable> acctstatus <enable/disable> secprofile <Security Profile

Nmuber> radmacprofile <MAC Authentication Profile Name> radeapprofile <EAP

Authentication Profile Name> radacctprofile <Accounting Profile Name> radmacauthstatus

<enable/disable> aclstatus <enable/disable> denynonencrypted <enable/disable>

Example:

[Device-Name]>set wifssidtbl 3.1 ssid accesspt1 vlanid 22 ssidauth enable acctstatus

enable secprofile 1 radmacprofile "MAC Authentication" radeapprofile "EAP

Authentication" radacctprofile "Accounting" radmacauthstatus enable aclstatus enable

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 250 251

Sin comentarios

Proxim ORiNOCO AP-2500 Guía de usuario Pagina 153