Proxim Harmony 802.11a Network Adapter 802.11a Guía de usuario descargar pdf (Pagina 22)

Installation 22

Mounting Instructions

The Harmony 802.11a Access Point ships with a wall mounting kit so that the unit can

be mounted to a wall or ceiling.

The wall mounting kit contains the following parts:

• One AP Mounting Disk

• Two Plastic Wall Mount Anchors

• Two #6x0.75" Wood Screws

In addition, you will also need the following tools to wall mount the Access Point:

• 3/16" Drill (for installations using wall mount anchors)

•Marking Pen

• Phillips Screwdriver

Ceiling Mount

Follow these steps to mount the Harmony 802.11a Access Point on the T-bar that

separates office ceiling tiles:

1. Slide the AP Mounting Disk over a ceiling tile’s T-bar so the bar rests between the

two clips on the mounting disk, as shown in the illustrations below.

Figure 3: Attaching the AP Mounting Disk to a Ceiling T-Bar

Figure 4: AP Mounting Disk Secured to Ceiling T-Bar

Ceiling T-Bar

Mounting cli

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 57 58

Sin comentarios

Proxim Harmony 802.11a Network Adapter 802.11a Guía de usuario Pagina 22