Proxim ORiNOCO Guía de instalación descargar pdf (Pagina 104)

Device Management

ORiNOCO® 802.11n Access Points - Software Management Guide 104

Parameter Description

SNMP Select Enable or Disable from the drop down menu.

– If enabled, it allows the user to access the device through the SNMP Interface.

: Any change in the SNMP access will affect the NMS access.

Version Specifies the parameter that allows you to configure the SNMP version. The available SNMP

versions are V1-V2c and V3.

By default, the SNMP starts in version V2c.

• If you select the SNMP version as SNMP V1-V2c, the following screen appears:

Figure 6-15 SNMP Version - SNMPV1-V2c

Configure the following parameters:

Parameter Description

Read Password Specifies the parameter that provides read access to device

by using SNMP interface.

The default password is “public”. To configure, enter a

new password in the Read Password box. The password

should be alphanumeric with minimum of 6 and maximum

of 32 characters.

Read/Write

Password

Specifies the parameter that provides read/write access to

device by using SNMP interface.

The default password is “public. To configure, enter a new

password in the Read/Write Password box. The password

should be alphanumeric with minimum of 6 and maximum

of 32 characters.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 177 178

Sin comentarios

Proxim ORiNOCO Guía de instalación Pagina 104